And the latest:
26 -28 inch scale fanned fret, 26 frets, 12-26 half scallop
Nordstrand Bowes Model Humbuckers
1 piece mahogany body
Purpleheart/figured maple neck w/ mahogany headstock overlay
Petrucci 3 way
250k CTS pot
Threaded Output jack (you can tighten it with a quarter)
Luminlay side dots
ABM single string bridges
Few things I learned doing this one:
Needed to increase the neck thickness in the pocket - I had to shave down two of the saddles on the ABMs as they're pretty much slammed. I'll be adding a little plate in on teh neck like I do on most other guitars I build to compensate for the current dimensions that the CNC cuts.
Fretting at the 1st/2nd fret is somewhat bitchy unless the nut is considerably rounded off on the treble side.
Well god damn