Looking to do the ADA MP1 3.666 mod to an MP1 I picked up years ago.
In the guide they have Mouser part numbers but a lot of them are obsolete. Not a problem for the resistors as the newer ones are listed right below them when I search, but the capacitors are a bit trickier. Here's the link to the guide: http://adadepot.com/mods/ADA_MP-1_MOD3.666_Hi-Res.pdf
Just wondering if anyone could recommend capacitors to replace the ones in the guide? I'm not too knowledgable about electronic components but I am handy with a soldering iron and modded my VHT GP3 preamp.
.022μF: mallory 150 .022 Cornell Dubilier Capacitors | Mouser
0.0022μF: 0.0022uF Kemet Radial Polyester 2200 pF 200 V 5 % Film Capacitors | Mouser (you'll need to pick based on the lead spacing you need)
0.001μF: MMK5102K400J01L16.5TR18 Kemet | Mouser (you'll need to pick based on the lead spacing you need)
1μF electrolytic: UFG1H010MDM Nichicon | Mouser
Looks like about $2 in parts.