H'okay, so, this is the earth...wait no. This is not the time for nonsense.
I've ordered much moneys in hardware for my RGT, new tuners, bridge, pups, rings, knobs, and even a flux capacitor. I'm now stuck. I need one last thing, but the info escapes me utterly.
I need to know what kind of locking nut will retrofit my currrent ibanez locking nut. I know the current one is 43mm (1-11/16") but nothing will tell me what the radius of the nut is. My next problem is how they mount. How do I know which ones mount from the top (with wood type screws) or from the back with 2 small hex bolts like the ibanez ones do.
This is the absolute last piece of hardware I'll need, but I'm stumped. I know a few of you guys have bought this kind of thing in the past.
A "Rear Mount" 43mm Gotoh nut will fit Ibanez guitars with no trouble. These have a 16" radius, which is as close as you're going to get to what Ibanez uses. Up until recently these were the OEM nut on MIJ Ibanez, actually.