J.custom | Ibanez guitars
So far they're all 24.75 scale, and this new Edge Custom Bridge R setting. 2 models get a maple board, and the red one is American Basswood while the rest are African Mahogany.
Also Google translation:
Compared with the RG model number of the original made in Japan JCRG11 pickup only sought to clarify the differences in character.
Two humbuckers wired original RG, so that the guitar to play rock guitar music of a wide range of total JCRG11 wood and hardware, including pick-up not only "high output" or "in the thickness of the range "rather than" reasonable feeling of power "and" clear sound "has been developed with an emphasis on. Front pickup characteristics that sustain comfortable with if in a warm and eyes reduced slightly the number of /-coil turns used Alnico 3 magnets, more than the front course number / turn employ Alnico 5 magnets, the high frequency range and clear sense of power pickup rear felt.
The classic floating tremolo bridge that is highly valued by many musicians still after 25 years since its introduction more than adopt the original Ibanez EDGE.
(R fingerboard already specifically tailored Shimuappu JCRG11)
The locking nut is a 42mm wide-adopted TOP LOK III. The difference between 43mm and 1mm while only generalize RG, coupled with differences in neck shape difference can be felt 歴然To. RG and R together with previous fingerboard is comfortable playing them apart.
The strap pins are easily detachable straps, Free Lok pin standard adopted in j.custom.
EDIT: The above are the JCRG11 series. The JCRG10 series have neckthru joints, ebony boards, and the EZ trems.
Here they are by the way.
J.custom - JCRG10-01 | Ibanez guitars