Converting and Edge/Edge variant to an Schaller/OFR arm - Page 2

   Heavy Metal Guitar   

Page 2 of 4 FirstFirst 1234 LastLast
Results 9 to 16 of 28

Thread: Converting and Edge/Edge variant to an Schaller/OFR arm

  1. #9


    Join Date: Feb 2010
    Location: Wisconsin
    ME: Ibby CST,CT,UV pwh
    MA: Ibby CST w/piezo
    Rig: Axe fx II

    iTrader: 4 (100%)

    Quote Originally Posted by Drew View Post
    They wear out with time, if you pop the bar in and out with any frequency. You have to replace them periodically.
    I do that daily....I go through bar bushings...but the inserts have been rock solid.

  2. #10


    Join Date: May 2009
    Location: Southern California

    iTrader: 0

    When I've done this I used a nylon washer on the top, since the Schaller arm holder has a flat bottom but the Edge has a slanted top. So the nylon washer gives a little and spreads the contact out over more surface. Ideally you'd have a mill handy and you'd counterbore a flat segment for the arm holder. But ideally I would be a billionaire and world hunger would be eradicated.

  3. #11


    Join Date: Sep 2008
    Location: Wynnewood, PA.
    ME: Ibanez Universe
    MA: Suzuki VC Flamenco
    MB: Ibanez SB900
    Rig: Hughes und Kettner

    iTrader: 5 (100%)

    You don't need to use the 12mm screw, if you dispense with the washer that comes with the assembly it works just fine. Of course, that's on an Edge Lo-Pro, not an original edge, so I'm not sure if you explicitly need the longer screw for the originals.
    When nothing less than second-best will do.


    GOLD HARDWARE ENTHUSIAST

  4. #12


    Join Date: Sep 2008
    Location: The house formerly known as the Haus
    ME: Ibanez S540LTD
    MA: Taylor Big Baby
    Rig: Laney GH50L

    iTrader: 13 (100%)

    Good thinking frank!

    The counterbore idea could be a total pain in the ass (may be worth doing to all of mine at once, but not anything id want to do on multiple occasions), but the nylon washer idea is great.
    R.I.P. Guitars Etc
    RHLC Chief Promotions Officer

  5. #13


    Join Date: Oct 2008
    Location: Phx, AZ
    ME: Custom Tele
    MA: Guild GAD F150
    MB: Fender Jazz Bass 24 V
    Rig: Jet City JCA-22H

    iTrader: 16 (100%)



    Chris can we get this stickied?

  6. #14


    Join Date: Sep 2008
    Location: Far, far away...
    ME: Les Paul Standard
    MA: Yamaha 6er/Tacoma 12
    MB: Peavey
    Rig: Blackstar Stage 60

    iTrader: 1 (100%)

    Quote Originally Posted by Toshiro View Post
    I wish Gotoh sold their newest bar mount as a spare part, and that it would fit an Edge/LoPro.
    This. The Gotoh mount is the best available IMHO.
    "The greatest power one may possess -- in any situation -- is simply not to care what happens.

    "In fact, it's the only power, all others being a semblance and mockery of it. But you must also not care about possessing the power itself. So fuck it."

    Thomas Ligotti

  7. #15


    Join Date: Oct 2008
    Location: Wellington, New Zealand
    ME: J.Craft RG2820
    Rig: RM100 > K412T

    iTrader: 1 (100%)

    Anyone done this without loctite?
    "That RD is one ugly fucking guitar, and I made the CrabClaw!" - Elysian

  8. #16


    Join Date: Apr 2009
    Location: Poland
    ME: Jackson SLATTXMG3-7
    Rig: Bugera 6262

    iTrader: 0

    I did. Now I have to tighten the bottom screw every couple of months because the arm holder goes a little loose.

Similar Threads

  1. [Tech] Swapping an Ibanez LoPro Edge for an OFR
    By Drew in forum Guitar: Tech, Electronics and DIY
    Replies: 22
    Last Post: 06-10-2014, 11:08 AM
  2. Mirror's Edge
    By Vince in forum Computers, Electronics, Gaming & IT
    Replies: 9
    Last Post: 11-15-2008, 05:04 PM

Tags for this Thread


Fractal Audio Systems  Shred Training  Angel Vivaldi
Bowes Guitarworks  Decibel Guitars  NumbSkull Audio Production



VigLink badge