Does anyone know if it's possible to use a Floyd trem block on an Ibanez Lo-Pro Edge trem? Somehow, after a few years of having the guitar set up this way, I've only just tonight noticed that the springs on my Gunslinger's trem are actually bent over an edge in the cavity
Basically, a few years back, I had to replace the bridge on this guitar, and got a sick deal on a Lo-Pro Edge, and ended up installing it in a way where it sits higher than it normally would...closer to non-recessed height (which I generally prefer), and since it has the bar screwed to the trem block that keeps the springs from popping out, i guess i've never noticed. I'm not much of a trem abuser, so I haven't had any actual issues with it, but if I can get a properly sized trem block, I'd feel a bit better about it. I believe 37mm would be about the right height.
Wirelessly posted (HTC G2: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_7; en-us) AppleWebKit/530.17 (KHTML, like Gecko) Version/4.0 Safari/530.17 Skyfire/2.0)
No, the screw holes don't line up. Gotoh blocks do though, I have a 41mm one laying around if you can use that, just cover postage.