I'm re-wiring my Baritone Tele with the new pickups and i'm a bit confused by the 5 way selector. I really haven't wired many blade switches other than a tele 3 way. It's HSS, 4 conductor Humbucker, 4 conductor Strat middle, 2 conductor Tele neck.
The problem is the switch has all the lugs in a row rather than 4 on each side, which is throwing me off when looking at a diagram.
The wiring plan is 1 Volume, 5 way, (No tone) and a mini switch to split the humbucker.
Switching: Neck, Neck & Middle, Middle, Middle & Bridge, Bridge.
This is how I have it wired (I think) minus the coil split (for now) and two tone pots
The bridge humbucker works fine, and in the middle position the bridge pickup is also active by itself..... the neck pickup is Very quiet in the 5th position, while the 2nd and 4th positions do not work at all.
The pickups are:
(Neck) Dimarzio Twangmaster, (Middle) Dimarzio HS-3, (Bridge) BG PUF
I just found this:
If this is correct...then I have it wired right.