I want to install a coil tap (push pull pot) in my other JP70 but want to try this with the stock PU's, to see how they sound when split.
The problem is I need to find out what the color codes are.
Is there a way to figure it out?
The color on the PUs are: black, white, red, blue and then there is the bare wire.
I looked at the three way PU selector switch and the blue wire of the neck PU is connected to it and from the bridge PU it's the red wire that is connected to the PU selector. Then on both PUs the black and white are just connected together.
The neck PUs red and bare go to ground and the bridge PUs blue and bare go to ground.
Can I somehow determine the color coding from this?
I looked at wiring diagrams, but it's rather confusing.
Any help would be much appreciated.