I was looking on the BKP website and it said in order to do ibanez inline style switching I would have to flip the magnet. Does that mean physically take the magnet out and flip it (I won't do this haha) or just turn the whole pickup in the opposite direction? https://bareknucklepickups.co.uk/mai...vol_1tone_.pdf
If its the first one what's the best setup for an HH setup on a 5 way switch using the ibanez stock switch. Can I do the whole Bridge, bridge slug, middle, neck slug, neck?
Would I have to grab a super switch and do something like this or can I keep the stock one and still manage? https://bareknucklepickups.co.uk/mai...per_switch.pdf Not sure since I only have a stock import 5 way switch and not a super switch.
I was wondering if you guys could help me out or if I needed to grab a super switch to install in order to do this properly. The guitar is an old ibanez 99' mij RG7421 if that helps at all. I'm new to wiring but my friend can help me solder, just need to figure out the wiring diagram. I'd rather keep the import switch since I already poured too much money upgrading the guitar but if I have to then I have to.
All I've ever done with my BKP's in my RG's was wire it up the same as any other pickup and it's been just fine. Just make sure you've got the colors right.