Hi All ,
And a happy new year !
Ok so I just took the plunge and purchased the above guitar.
I have a few guitars at the moment
2 X rg550 one with Bare Knuckle PuPs and the other Dimazio Evo's
1 x Ibanez premium with IBZ / Dimazios
1 x Jackson standard Dinky with Emg 81 /85
All the above work and sound great depending on what music I am bashing out at the time.
Now onto my problem
The new Jackson has Seymor Duncan's init Zebra JB in the neck and Zebra 59 in the Bridge.
The guitar gives out a fair amount of Hum and Buzz when plugged into the same kit as the other guitars using the same leads etc .
It is being used via Roland GT-001 into my MAC.
Now I have checked all the wiring / grounds etc and it all looks fine , and then I read something about EMI frequency causing it .
Depending on what position I sit or stand in when its all plugged in the noise goes .
Anyone have any ideas what I can do to remedy the solution ?
Many Thanks in advance