I need a bit of help figuring out the best way to do this. It's been a while since I wired anything other than 1 pickup with 1 volume knob and i'm a bit rusty. Guitar in question is my new LTD. I will not be using a tone pot, so I can use some type of switch or a push/pull pot for the blower as long as it'll fit in a potentiometer hole. I thought I had a 3 way blade switch laying around but I do not so 5 way it will have to be for now. If I could wire the 5 way to do the coil split would be nice, but I need a super switch for that don't I?
*edit* If I use a push/pull for the volume and coil split and also use another push/pull as the blower switch (only use it for that, not as a tone or other volume) would that cancel out the split when enabled?