I have a project body coming soon that I will be painting and I have a few questions. I plan to use ReRanch products unless you guys have a better suggestion. Unfortunately I am limited to aerosol cans but I think it'll turn out Ok if I take my time. I would like for this guitar to have binding, but I don't have the tools needed to route the body for it, nor any experience with that type of thing. I originally thought about masking the body off with pinstriping tape for a natural binding, but I think i'm going with either Lake Placid Blue or Inca Silver so it really needs white binding. Is it a bad idea to clear coat over top of pinstriping tape? The body will be made of Poplar which is a closed grain like Maple, so I don't need to grain fill, right? Just sanding sealer, white primer, color, and clear.