|CQ's 5150 From Hell : Straight high gain 5150 preset for the Axe-Fx Ultra. This is tuned to go through a Recto slant 4x12 with V30's - it will be a bit bright for an FRFR setup, and probably a little too bassy as well.
|EJ Cliffs of Dover : Delay and verb with a touch of EQ to take the edge off the top end.
|Steve Vai - Ballerina : Steve Vai's Ballerina 12/24 from Passion and Warfare.
|David Gilmour - Run Like Hell : Close to DG's settings.
|CQ's FNV Rhythm Tone : Core Rhythm tone for Facta non Verba. This is 95% based off of Nolly's Recto preset, with a few tweaks for my own mixes.
|CQ's FNV Lead Tone : Lead tone that I'm using for Facta non Verba. Model is a 5150, Ultra only.
|El Capistan / Strymon Type Tape Delay + Plate Reve : From the FAS boards, similar to the Strymon tape delay we're all raving about.
|CQ's 6505+ Dark and Direct : Direct, somewhat dark tone for the Axe-Fx II. Modeled after my own 6505+, using 4x12 Uberschall cabs w/V30s (Redwirez Impulses). Setup for stereo.
|CQ's FNV Lead Tone : Migrated from the Ultra, with a few changes to compensate for the tube modeling.
|MarkIIC+ Rhythm : Mark IIC+ Rhythm Preset for the Axe-II.
|Reaper Nanokontrol2 Keymap & Scene Data : Reaper key map file and a scene data file for the Korg nanoKontrol 2 control surface.
Load them up and you'll have control of the volume, pan, record arm, solo and mute of tracks 1-8, transport, in
|CQ - Pod HD Pro Fireball Dual Dry High Gain : A simple dual-path Fireball patch for the Pod HD Pro. Sag and Bias all the way down. Not really for recording, but sounds pretty monstrous in the room/FRFR.
|CQ - Pod HD Fireball Lead Tone : A pretty plain jane, somewhat bright lead tone that's fun to improv with. Your basic delay/verb with a lot of mids and a presence boost.
|6505 Full Field Dark Lead : This is a pretty dark lead tone that I'm liking these days. You need the Ownhammer FF impulses to use it. I'm calling it "full field", though it's really a pair of farfield impulses panned center. It
|CQ's Mesa Recto : My take on Adam Cook's Mesa Recto patch. A little tweaking and a PEQ block with a low end rolloff for recording.
I'm using the Ownhammer Bogner V31 "Fat" libraries for this. With stock cabs, I'd sa
|Axe-Fx II Mesa Mark IV : Some small edits of mine to a patch from Marco85 on the FAS forums. Hard gated with some bypassed delay/cho/verb for MFC-101 users.
99% of this is Marco's tone - I just edited it to my liking.
|CQ's Bogner Uberschall : Bogner Uberschall using Euro Uber for the Axe II. I'm using a Bogner impulse from Ownhammer, which darkens the sound up a bit - less of a djent tone and more of a power metal setup.
The PEQ block i
|CQ's Bogner Uber v2 : Bogner Uberschall high gain / fast gate with my stock template. I built this using an Ownhammer 412 V31 "Fat" 2FF Impulse - so a standard impulse with V30's may need to have the room level and motor d
|CQ's Recto Modern v2 : Mesa Recto Modern high gain / fast gate with my stock template. I built this using an Ownhammer 412 V31 "Fat" 2FF Impulse - so a standard impulse with V30's may need to have the room level and motor d
|Digitech GSP2101 Owner's Manual : The owner's manual for the Digitech GSP2101.
|CQ's 6505+ Tone Match Axe-Fx II Patch : Pardon the shit playing, I just picked up a guitar and noodled something for the matching. Guitar is my mahogany Carvin CS4 with BKP Aftermaths.
|6505+ Tone Match Neutral : Here's a couple clips with my JP6. Amp settings are neutral on the 6505, and close to it in the amp block. No post at all:
Just a high/low
|CQ's 6505+ Tone Match v2 : The latest incarnation of my Tone Matched 6505+ Preset. I use Ownhammer cabs, so substitute the cab block with whatever sounds best to you.
The cab I use for this is called Ownhammer_Bogher_V31_PR3
|6505 Wet Lead with Looper/External CC : This is just a fun preset that has way too much gain, delay and reverb on it. It's setup to have the Looper assigned to Extern 2 with the pedal controlling the looper's playback volume.
It's no goo
|Mesa Boogie Roadster - Axe-Fx II Tone Match : Tone match of a Mesa Boogie Roadster. Channel 3 Modern with Drew's settings, using a (stock) Ownhammer 412 cab w/V30s.
|CQ Heavy 6160 : Heavy 6160 preset that I use with my JP6 (Crunch Lab/Liquifire). Tone matched from my 6505+ as a baseline but that's about it.
The cab I use is in User 21, an Ownhammer 412 Bogner V31 (PR30 2FF).
|CQ's Wet 6160 Lead Patch : Lead patch used here:
I use an Ownhammer Bonger impulse on it (OH 412 Bogher V31 PR3
|CQ's First Bank of 10 : This is my first 10 presets for the Axe-Fx II. I'm posting this here mostly as a backup, since this is dialed in and setup for my guitars, using mostly aftermarket impulses.
I have my MFC-101 set t
|Reaper Copy/Paste Revert : This reverts the copy/paste keybindings to ignore time selection, so that Ctrl-V pastes in place, and command-ctrl-v pastes with time selection.
|SV Compressed Bass : SV Bass Preset w/smooth compression. So far so good reamping with it!
|CQ's First Bank of 10 - FW9 : My first 10 presets for Firmware 9. Mostly just putting it here as a backup, lots of Ownhammer cabs in here and tuned for my guitars and rig.