questions
Results 1 to 2 of 2

Thread: questions

  1. #1


    Join Date: Jan 2020

    iTrader: 0

    questions

    I know where root notes are on scales but how do you use the root notes when playing? the other question i have is, I really want to tune to D standard but my guitar goes out of tune when i do that. I'm not tuning that much lower and i have an esp ec-256 and esp's is set up pretty well, so o woupd i be ok if just put on thicker strings or do i need have a new setup done? i really cannot afford it thats why i was asking

  2. Remove Advertisements
    MetalGuitarist.org
    Advertisements
     

  3. #2


    Join Date: Sep 2008
    Location: San Jose, CA
    ME: Rich Mahogany
    MA: Godin A6 Ultra
    Rig: Mesa/Fractal

    iTrader: 16 (100%)

    Use them? You just play them, right?


    When you retune to D Standard, how do you mean "goes out of tune"? Like, you'll tune to D, and then after a few minutes it'll be out of tune? If so, that's just the neck slowly adjusting to the new tension. For a Les Paul style guitar, going from Drop D to D Standard shouldn't be too bad of a change, so I'd suggest going to D Standard, and just keep retuning. It might take it a few hours to fully settle.

    At that point, you may want to set it back up if the action is too low (frets buzzing out and such). It's not a difficult process... I'd venture that most of us have learned how to do it specifically because we were all too poor to pay someone else to do it when we first needed it done . There are a lot of videos on how to do this, something like this...





    You don't necessarily need heavier strings... I'm using a set of 10's with a guitar tuned down to Drop B . They are loose, but I've learned how to work with it. For a more standard tension, 10's would be fine... 11's might be tight, but it's an easy thing to change

Tags for this Thread


Fractal Audio Systems  Shred Training  Angel Vivaldi
Bowes Guitarworks  NumbSkull Audio Production



VigLink badge