Slightly confusing NGD - Yamaha MG10XU output issues
Results 1 to 1 of 1

Thread: Slightly confusing NGD - Yamaha MG10XU output issues

  1. #1


    Join Date: Jun 2009
    Location: Toledo,OH
    ME: Jackson SLATXMG7FR
    MA: Takamine G335 12-String
    MB: Ibanez SR-405
    Rig: Peavey 6505+

    iTrader: 0

    Slightly confusing NGD - Yamaha MG10XU output issues

    Recently purchased a Yamaha MG10XU mixing console to use for my podcast and decided to use it as my audio interface as well so I can hook up all my recording devices to one unit and control the levels independently. However, I've been trying to get audio to come out of my KRK Rockit 6s and headphones and get either quiet audio or really loud and distorted audio. Tried switching from XLR to TRS cables and tested all outputs, To Mon/To St switch and the only way I've been able to get decent audio is to engage the FX which gets better sounding audio but with FX. I'm pretty much stumped guys anybody got some leads on where my issue lies? I thought it might be a driver conflict since I hooked up the mixer to USB before installing Yamaha's driver package and Windows had installed some drivers before that. I can uninstall the Yamaha drivers but I'm not sure where to look for the one Windows installed. Any help is appreciated!

    *edit* I will note that audio coming from the inputs on the mixer work fine, I can run my POD HD500 into an input and get audio through my monitors just fine without any real issues.
    Last edited by HamBungler; 03-27-2019 at 08:00 PM.

  2. Remove Advertisements
    MetalGuitarist.org
    Advertisements
     

Similar Threads

  1. Schecter Guitar line confusing?
    By Atomant in forum Guitar: Instrument Discussion
    Replies: 31
    Last Post: 03-02-2015, 02:54 AM
  2. NGD: Kraken Octa 8 (Slightly Pic Heavy)
    By ShreddyLZ in forum Guitar: Instrument Discussion
    Replies: 11
    Last Post: 09-23-2013, 04:15 AM
  3. Axe-Fx II: Output 1 / Output 2 side by side (clips)
    By Chris in forum Music: Recording Studio
    Replies: 17
    Last Post: 05-02-2012, 12:41 AM
  4. NGD - Carvin DC127 w/ slightly less crappy pickups and Fishman
    By Jeff in forum Guitar: Instrument Discussion
    Replies: 14
    Last Post: 01-22-2012, 06:56 PM
  5. High Output vs Low Output?
    By DeadSharrk in forum Guitar: Pickups Discussion
    Replies: 11
    Last Post: 06-30-2011, 06:28 PM

Tags for this Thread


Fractal Audio Systems  Shred Training  Angel Vivaldi
Bowes Guitarworks  NumbSkull Audio Production



VigLink badge