Well after a 5 hour trek to get this bad boy here it is!
:flex:27" scale 5 piece neck-through body design
:flex:Cepheus T-7 bridge with graphite saddles
:flex:Maple fretboard with no markers
:flex:24 Extra jumbo 2.9 mm frets and a 13.7" (350 mm) radius neck
:flex:Grover die cast tuners...
Well I got this guitar like two weeks ago, but have been so damn busy at work I only had a chance to play it two days ago. :rant:
Well here are some photos of it (sorry for my lack of awesome photo taking skills).
The specs are pretty straight forward, JP pup combo, SS jumbo frets...
So after much deliberation, I've decided to put Cognac up for sale. I love this guitar, and she's served me well, but she doesn't much play time compared to Moldy, so it time to part ways.
Specs are below:
Mahogany Neck and Body
Curly Maple Top
25.5" inch scale
God damn KxK gas hit hard. Need a DC-7 with p-90's desperately. Buy me now Scott!
Flamed maple top.
Walnut veneer between body and top.
Birdseye Maple fretboard.
Jumbo Stainless frets.
5-piece neck, maple with koa.
Tung oil finish on neck.
It's is a great guitar, I...
Comes with hard case.
# Real Flame Maple top and double cutaway light mahogany arch top body
# Mahogany Body
# 27" scale 5 piece maple neck-thu body construction
# Blackout Pickups
# Ebony fretboard with no markers. Position markers are located on the side of the neck.
# 24 Extra Jumbo 2.9mm...
I've been looking for a nice 7 for the last while since I sold my Ibanez 7621, I had a thread here about it looking for ideas on what to pickup. There were a few other Carvins I was looking at but this one had more specs I wanted on it, like a trem and SS frets.
It arrived here in Ireland last...
I WTB OR WTT some Carvin 727 pickup for a project I'm working on. Bridge is fine but I will also take a set if you have it. I figure since most of the guys here swap them out here's your chance to get rid of them.
Any reasonable offer considered, I will also consider putting...
I restrung my dc727 with a 64 for the low b string in the past and I was surprised to find it wouldn't fit through the tuner (I think they're Grovers?). So recently when restringing I bought a 60 thinking that it should definitely fit. Turns out i had to unwind a portion of the string to make...
Messing around with some new tones for a big organic metal mix.
I used my Bernie Rico Jr Jekyll 727 (BKP Black Dog bridge) through the Axe-FX for guitar tones.
It's not mastered super loud so crank it up a bit :metal:
Just recorded a quick clip of Misha playing my Bernie Rico Jr Jekyll 727 to show off how huge it sounds. The pickup you're hearing is a BKP Black Dog.
So today a lovely package of joy got delivered, check her out:
This thing is just amazing, fit and finish are literally flawless, and it sounds incredible too. I'll give a full review soon, but right now I'm off to have a good play!
At the moment there's an...
Just got some cellphone pictures from Bernie Rico Jr of my finished custom Jekyll 727. The finish looks ridiculous!!
It's all mahogany neck-thru with a big flame maple top. For pickups I went with a Bare Knuckle Aftermath bridge, Riff-Raff neck. *:)
For those who do not visit ss.org or 7heaven.org too often......I received this today in the mail:
DISCLAIMER - I suck at taking photos!!!!!
Once I spend more time with it, I'll post a review, but I have to say, I'm impressed! I have not recorded any clips of it yet, as I have to make...
My old Agile Septor 727. Purple finish, maple board, 27" scale, TOM, coil tap. This guitar plays really, really well and sounds fantastic, even with the fairly warm stock pickups, and the coil tap sounds surprisingly good as well. Very comfortable neck; this early run is probably my...
So, after a while I found out that the SC-607b just wasn't for me, so I ordered an Agile. I have to say I'm very pleased with my decision. Maple fretboard FTW! The stock pickups are okay and will do for the moment before I can gather some cash for BKP's.
Here are some pics of the beast...
Agile Septor 727 Purple Quilt w/ Maple fretboard
Carvin 6 string Bolt kit
Brief & Accurate Description of gear/guitar: Bought this last year locally, its a Carvin bolt kit. Ebony fretboard, Light blue paintjob (done by an amateur, so its not great, but from a foot away it looks fine...
Ok - I can't help it. I feel like I'm in a relationship, have gotten married to the girl of my dreams and then found out she had plastic surgery and that she isn't what I thought she was.
Thats how I feel with this Carvin. I originally bought it cuz I was told it was an alder/maple guitar and...