Metal Guitarist Forums banner

chain

  1. Music: Recording Studio
    Ive been recording for a few years now. All I've been using is the emulated out on my HT-100 Metal directly into my interface and into GarageBand. Needles to say, I'm not getting the best guitar tone in my recordings. Meanwhile I've got a mid 90's dual recto sitting in the room collecting...
  2. Guitar: Gear Discussion
    I'm looking at getting the TU-3. I'm using a PC program to tune now. I also want to use a single power supply and daisy chain. I looked at the PSA-120S and PSA-120S2. Apparently the PS can handle 500mA. After looking at pics of the TU-3 the label says max current 200mA. I'm no electrician, so...
  3. Guitar: Gear Discussion
    I'm re-working my pedalboard and trying to figure something out - hoping you guys can give me some guidance. Here are the pedals I'm working with: Boss Tuner TS9 HM2 NS-2 noisegate MXR Micro Chorus Flashback X4 Joyo 6 band EQ ISP Decimator Here's what I'm thinking currently (effects loop in...
  4. Music: Recording Studio
    NO!
  5. Music: Recording Studio
    Hi all, I know this is probably a dumb question, but James and I are getting ready to record a demo for our band and I want to make sure I'm as prepared as possible before we get into the studio tone wise. I've recorded a few times before using my pod into reaper, but this time we are going to...
  6. Guitar: Tech, Electronics and DIY
    Hello, Any advise on where to position the MXR EQ 10 within the Signal Patch or Pedal Chain? I tried several ways, and im not liking it. Below is my current setup, Guitar 2 Wah Pedals Noise Supressor NS 2 FX loop of the NS2 sending thru Tube Screamer then TONEBONE Hot British MXR EQ 10 Last...
  7. Guitar: Gear Discussion
    So I've heard that your supposed to run you the effects (echo, flanger, chorus, reverb etc...) through the amp effects loop, and run everything else through a chain into the input. I tried that the other night and all I got was feed back. My amp is a Peavey Delta Blues 210 and I was trying to...
  8. Guitar: Gear Discussion
    I posted this on SSO, but thought I would post it here as well. I need help putting together my signal chain. As it stands right now, I am using the Digitech RP1000 going into a Fender Mustang III amp, using the 4CM. I have three pedals: Crybaby From Hell, Mesa Boogie Throttle Box, and ISP...
  9. Music: Recording Studio
    This thing works GREAT. The level issues I was having with the MOTU are gone, and creating an aggregate device in OSX to use both the MOTU and this at the same time in Reaper took all of 2 minutes. Out of the box with the input at noon, my DI peaks right around -3db and sounds spot on when I...
  10. Music: Recording Studio
    Being fairly new to recording an mixing im still just learning the ropes when it comes to mixing and mastering. What do you guys do with (heavily) distorted guitars? Im fairly decent at EQ'ing now but i've been messing about with compressors and limiters. Do you guys do anything special with...
  11. Guitar: Gear Discussion
    Problem: Significant "crackling" noise heard on high-gain patches. Rig: Axe-FX Ultra -> FBT Verve 12ma. Various guitars. MFC-101 (not always hooked up). Situation: Whenever I use a high-gain patch, like kostein's LoG patch or Thor's Saw and Hammer, I can hear a crackling, electrical noise...
  12. Guitar: Gear Discussion
    So, I've never used more than 2 pedals with my rig, a Decimator G-string, and a TS7. I've just gotten another TS7, and recently got a Super Chorus and Crybaby. My question is, how would you set these guys up? I was thinking... Guitar > Decimator > Crybaby > TS7 FX Send > Decimator > Super...
  13. Guitar: Gear Discussion
    Hello all,for the past 4 years i have used a peavey bandit with a average g1x zoom multi efx pedal and a rc 2 loopstation. i recently got payed out for a insurence claim due to a motorbike stack:yesway: so i decided to treat myself to a jsx amp 5150 cab and pedals. but the problem is i have no...
  14. General Music Discussion
    Rules. :metal: That is all.
  15. Guitar: Gear Discussion
    i put the x3l away and dragged out some of my pedals.this is how i have things set for now but im not sure im getting the best out of it. guitar--wah--q zone--whammy-zw44-isp--T2 loop...ge7--ch1--tr2--bf2--evh90--carbon copy--ns2. i think i may have a drama with the T2 head as its fucking noisy...
  16. Guitar: Gear Discussion
    Well I've decided to get my Triaxis fixed (I should have it back in about a week) and replace the Simul Class 2:90 that I sold a couple years ago, which I'm still kicking my own ass for doing. I acutally just grabbed one off Ebay so I've got that covered. My question is the best way to run my...
  17. Guitar: Gear Discussion
    I've seen quite a few approaches to this, so it'd be interesting to see how everyone here does it. How do you arrange all your effects/stompboxes etc. in the signal chain? Here's mine... GUITAR V V V WHAMMY PEDAL V V V LINE...
Top