Metalguitarist.org banner

output

  1. Guitar: Pickups Discussion
    Looking for some more tonal options. Pretty much every humbuckered guitar i own has a high output pickup. I've not really tried many lower output options. Currently leaning towards some Duncan Antiquities but i'm open to suggestions. I'll be playing rock/blues sort of tones. Im using an axefx...
  2. Guitar: Pickups Discussion
    Okay guys, so I've had my Korean PRS SE Custom 24 for a few months now and while it seems most don't seem to care for the 85/15 S pickups, I actually quite like them. I think they have my desired output overall, and I'm wondering, what aftermarket pickups have a similar level of output? The way...
  3. Music: Recording Studio
    Recently purchased a Yamaha MG10XU mixing console to use for my podcast and decided to use it as my audio interface as well so I can hook up all my recording devices to one unit and control the levels independently. However, I've been trying to get audio to come out of my KRK Rockit 6s and...
  4. Guitar: Gear Discussion
    Long story short, my Holy Grail reverb shit out and I need a replacement. I previously tried a TCE HOF and it turned out that my amp doesn't get along with 'true bypass' pedals. The Holy Grail sounded great, I like that it was stupid simple but the fact it failed tells me now's not a bad time...
  5. Guitar: Gear Discussion
    I like the Pure Tone output jacks that holds onto the cable with 2 more thingys than a regular output jack. BUT... Planet Waves contact point is too short, and VERY easily cuts the signal. So I have to get new cables. Just wanted to share my experience with this and make sure nobody else...
  6. Music: Recording Studio
    Hi everyone! It's been awhile since I posted on this website. Anyways. I have a Blackstar (HT metal 5H) tube amp. I would like to record from the emulated output (to my usb interface) without connecting the amp to my cabinet. It's a 5 watt amp, do you guys think I absolutely need a loadbox...
  7. Guitar: Instrument Discussion
    https://puretonetechnologies.com/product/pure-tone-mono-14-jack/ I'm sold! I wanna have these in all my guitars. It has happened more than once that my guitar jacks have been loose (for some reason never at home or rehearsal, but once on stage those stupid guitars goes all glappy) But this...
  8. Guitar: Gear Discussion
    Ok I really should know this by now but I'm asking for help to be sure. I have a 6505 MH which has one extension speaker output which can be switched from 8 to 16 ohms. I have one Peavy 112-6 cab which is 16 ohm. I would like to add another. These cabs only have a single jack input. If I put a...
  9. Guitar: Pickups Discussion
    I was talking with a couple of friends today and we were discussing high output pickups (ie Duncan Distortion/JB/Invader/etc...) vs medium gain pickups and how the higher output sacrifices tone. Given that a good chunk of people use a boost of some kind or other in front of their amp rather than...
  10. Guitar: Pickups Discussion
    replacing the Dimarzio Chopper in the neck spot with this. I like the chopper but it's a tad too hot for my tastes. Was checking out medium output pickups and figured I'd give the demon a shot. Waiting for my bridge pickup to arrive can't wait to get this installed.
  11. Guitar: Pickups Discussion
    I know, we haven't had one of these in a while. I did do some searching, both on here and on the rest of the internet, but I'm really looking to swap out the pickups in both of my Les Pauls - an '04 silverburst Custom and a wine red Studio from '92. They both have high output humbuckers in the...
  12. Guitar: Pickups Discussion
    I've read all the hype surrounding the vintage '80s Duncans wound by Maricela Juarez and was curious to hear what an old JB sounds like, since I've never gotten along with the new ones. I found an old "JBJ" on eBay for a decent price and decided to try it in Noodles' old white USA Soloist. That...
  13. Guitar: Tech, Electronics and DIY
    I bought an Ibanez JPM100 P2 and P3 recently, and the P3 (which is very beaten up) sounds drastically different to the P2. It sounds like single coils, not humbuckers. The output jack was a bit funky, so I just replaced it, and hoped that'd fix the issue, but it hasn't. I actually quite like the...
  14. Guitar Parts & Accessories For Sale / Trade /...
    Preferably a lower output one but will consider just about anything. Needs to be F spaced
  15. Guitar: Pickups Discussion
    Thinking about a change in my Suhr again - I like how the Rebel Yells sound, but theyre' really not all that hot, at all, meaning I have to push the Rectfier's preamp gain further than it likes, and I've got them adjusted about as close to the strings as I can get away with. They kill for lower...
  16. Guitar: Gear Discussion
    Seems like I'm running in some sort of issue; My E B G strings (6strings guitar) on one of my guitars are not loud enough to go through the noisegate when I do fingertapping on them, as soon as I start fingertapping on the G string at loud volume (rehearsal volume) the string just produces a...
  17. Guitar: Gear Discussion
    On my power Kemper I have a single output and I use it for bass and guitar. I've spoke to the Kemper chaps and they have said the 8-16 ohm limit on the kemper is over the top and 4 ohm is fine and it has an immediate cut out preventing permanent damage if it did try and kick out too much. (The...
  18. Guitar: Instrument Discussion
    Sorry if this thread should be somewhere else but i have a question.~Should i get a seymour duncan invader pickup in replacement for my jackson high output humbucker?~ Or is there no big difference in sound but just $80 out of my wallet? BTW i have a jackson js23 dinky special run satin grey.
  19. Guitar: Pickups Discussion
    so I bought an Ibanez RG752fx seven string, great guitar, but not really liking the Dimarzio PAF 7's in it. They sound OK, but not enough output. So I need recommendations for a Higher output set, I usually like Duncans, I have guitars with the Full Shred and Distortion, and I love both or...
  20. Guitar: Pickups Discussion
    Duncan is redesigning its website and part of it will be to include mV numbers of their pickups. They've developed a procedure they're convinced gives accurate figures. The whole thread from their forum is here. Here is the procedure they are using. Here is the latest output data for their...
Top