Metal Guitarist Forums banner
toggle
1-13 of 13 Results
  1. Guitar: Tech, Electronics and DIY
    Can I use a regular on/on miniswitch for turning 18v mod on and off? I wanna have this for my HSS guitar for some versitility. And how would I wire the battery to it?:ugh:
  2. Guitar: Instrument Discussion
    First brand new guitar I've bought since 2007... which was, oddly enough, another Schecter. This is the relaunched Blackjack line. Thinner necks, ebony boards, subtle inlays, all black hardware, Duncan Nazgul/Sentient combo. Want to remove the Vol/Vol/Tone with the pull on the tone and replace...
  3. Guitar: Tech, Electronics and DIY
    Alright, so I'm modding my crybaby to hell and back. I've got it set up with a mini toggle to swap between two different inductors, and I was trying to add LED's to show which inductor was currently on (yellow or red fasel). I can't seem to get both the LED and the sound to work. I can do one or...
  4. Guitar: Pickups Discussion
    Hi I am new to this forum and wanted to see if anyone could provide some help. I have an 81/85 set that I was installing in a one tone, one volume, and toggle setup. Now the only pickup that is working is the 85 in the neck with the toggle switch only selecting the 85 as well in all three...
  5. Guitar: Gear Discussion
    Interesting.... CLICKY!
  6. Guitar: Tech, Electronics and DIY
    I'd like to re-wire my LP, but I don't want to have to widen any of the 3/8" holes to 1/2", like I did on my Epi LP. I'm planning on moving the 3-way switch to the bottom control area. I've been looking around, but coming up empty handed.
  7. Guitar: Tech, Electronics and DIY
    Hi, last weekend I installed DiMarzios in my JP70 and a push-pull pot for splitting the humbuckers. I used the DiMarzio wiring scheme according to which I needed to get the DiMarzio 3-way toggle switch, so I could not use the original 3-way toggle. The difference between the two is that the...
  8. Guitar: Tech, Electronics and DIY
    Essentially I'm looking for this: Or at the very least the nut for it, in black... I've been searching for a few days now, do better than I have please? :lol:
  9. Guitar: Tech, Electronics and DIY
    Mini 3 Way Toggle Help?? I've got an ESP Horizon that has this awesome mini 3 way toggle in black chrome similar to the EBMM JP series. What is the mini 3 way toggle switch used on ESP Horizons?? Who makes it? I want to put one of them in another of my guitars since it's shorter throw and...
  10. Guitar: Tech, Electronics and DIY
    Is the 3-way toggle switch on my RGD 2127Z a mini-toggle switch? :scratch: Think that this is what I need, but wtf do they mean by On/Off? STEWMAC.COM : Mini Toggle Switches
  11. Guitar: Pickups Discussion
    Not sure if this belongs in Gear or Electronics, but here ya go: An Aftermath demo that is not djent! It's actually a pretty great raw rock pickup. They have a nice twang when split, too.
  12. Guitar: Tech, Electronics and DIY
    The toggle in the A7 has been acting up, It will not stay in the Bridge or neck positions. when I try it goes back to the middle by it's self. This is what the toggle looks like so I couldnt tell if the peice that holds the toggles in place were worn out or what. But how hard would it be to...
  13. Guitar: Gear Discussion
    So the three way toggle in my soloist is not working quite right... In the down position I get the bridge pickup. In the up position I get the neck pickup. So far so good.... in the middle position I only get the neck pickup. Any ideas? I'm using this as my wiring instructions: and this...
1-13 of 13 Results
Top