Metal Guitarist Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,184 Posts
It looks like they are using TRS cables on the output side. You could build something like this with a couple of 1590B or 1590BB type enclosures. One for each end of the signal chain. It can get spendy if you need 120V power on the snake as well because you will need a shielded power cable to run it down the snake.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top